saw bandpass filter F3504 part no. F3504 rev. date 2006-09-06 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3002-as02 1/7 1.20.15 0.60.15 2.080.15 5.000.15 5.000.15 1.270.05 1 4 3 8 8 77 6 3 2 1 6 5 5 4 2 1.350.15 features z rf bandpass filter z high attenuation z usable bandwidth 4mhz z no matching 50 single-ended operation z ceramic surface mounted device (smd) package package dimensions dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1. 0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameter unit minimum typical maximum operating temperature range c -30 25 80 storage temperature range c -40 - 85 power handling capability dbm - - - electrostatics sensitive device ( esd ) pin configuration 2 input 6 output 1, 3, 4, 5, 7, 8 case ground itf 3504
saw bandpass filter F3504 part no. F3504 rev. date 2006-09-06 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3002-as02 2/7 specifications fc = 350.0mhz terminating source impedance : 50 terminating load impedance : 50 notes : 1) all specifications are based on th e matching schematic shown below, measur ed by agilent network analyzer and full 2 port calibration. 2) electrical margin has been built into the design to accoun t for the variations due to temperature drift and manufacturing tolerances 3) all attenuation measurements are measured relative to insertion loss minimum typical maximum center frequency ( fc ) mhz - 350.0 - insertion loss (fc +/- 2.0 mhz) db - 2.5 3.5 amplitude ripple (fc +/- 2.0 mhz) db - 1.0 1.5 absolute group delay at fc nsec - 150 - group delay variation (fc +/- 2.0 mhz) nsec - 50 - vswr (fc +/- 2.0 mhz) - 1.5 2.0 relative attenuation ? ~ fc - 15 mhz fc + 25 mhz ~ ? db 45 45 50 50 - temperature coefficient of frequency ppm/c - -32 -
saw bandpass filter F3504 part no. F3504 rev. date 2006-09-06 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3002-as02 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) marking configuration itf 1) 3504 2) 1) manufacturer name 2) marking number * ink or laser marking available
saw bandpass filter F3504 part no. F3504 rev. date 2006-09-06 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3002-as02 4/7 ch1 s21 log 10 db/ ref 0 db center 350 . 000 000 mhz span 100 . 000 000 mhz cor prm 6 apr 2004 22:00:00 1 2 2: - . 00860 db 4. 000 000 mhz ref=1 ch1 markers mean : -2 . 2455 db s. dev : . 26020 db p-p : . 95950 db ch1 s21 log 10 db/ ref 0 db start . 030 000 mhz stop 1 000 . 000 000 mhz c 3 apr 2004 11:59:45 1 1: -2 . 4050 db 350 . 000 000 mhz typical performance ( at 25 )
saw bandpass filter F3504 part no. F3504 rev. date 2006-09-06 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3002-as02 5/7 ch1 s11 swr 1 / ref 1 center 350 . 000 000 mhz span 100 . 000 000 mhz cor 3 apr 2004 11:57:28 1 1: 1. 4053 350 . 000 000 mhz ch1 s22 swr 1 / ref 1 center 350 . 000 000 mhz span 100 . 000 000 mhz cor 3 apr 2004 11:57:40 1 1: 1. 4080 350 . 000 000 mhz ch1 s11 1 u fs center 350 . 000 000 mhz span 100 . 000 000 mhz cor 3 apr 2004 11:57:03 1 1: 59. 967 -15 . 906 28. 588 pf 350 . 000 000 mhz ch1 s22 1 u fs center 350 . 000 000 mhz span 100 . 000 000 mhz cor 3 apr 2004 11:57:14 1 1: 60. 584 -15 . 768 28. 839 pf 350 . 000 000 mhz input / output vswr charts input / output smith charts
saw bandpass filter F3504 part no. F3504 rev. date 2006-09-06 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3002-as02 6/7 packing specification 1. reeling quantity : 1000 pcs / reel 2. taping structure : the tape shall be wound ar ound the reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel top cover tape carrier tape end start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F3504 part no. F3504 rev. date 2006-09-06 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr3002-as02 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 5.50 0.1 b 5.50 0.1 c 7.25 0.1 d 1.95 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|
